U22-160

USB 2.0 over UTP Extender with 2-Port Hub

  • Extends USB 2.0 devices up to 165 ft (50 m) using Cat5
  • Supports high-speed, full-speed, and or low-speed devices
  • Status LEDs indicate Power and Data
  • Supports Hot Plug/Unplug
  • Can power most USB devices without power supply
  • Plug and Play installation
    • Share

    Description

    The U22-160 extends your host PC’s USB 2.0 port across a single Cat5e/6 cable to 50 meters (165 ft) with data rates up to 480 Mb/s.

    In most instances, no power supply is needed for either side as the local (host) side gets its power from the PC and it sends PoC (Power-over-Cable) to the remote (device) side. However for convenience a power supply is included that can be plugged in to the remote end for power hungry USB devices. The remote end has a two port hub built-in to allow connection of 2 USB Devices. The U22-160 is a perfect solution for industrial and commercial applications.

    This product can be used to extend a broad range of USB devices like webcams, printers, keyboards, and disk drives up to 165 ft (50 m) using single Cat 5/6 cable.

    Features

    • Extends USB 2.0 devices up to 165 ft (50 m) using Cat5
    • Supports high-speed, full-speed, and or low-speed devices
    • Status LEDs indicate Power and Data
    • Supports Hot Plug/Unplug
    • Can power most USB devices without power supply
    • Plug and Play installation
    • Surface/Wall mount brackets included

    Block Diagram

    Specifications

    Bus InterfaceUSB 2.0
    Number of Ports2 (on the Remote Unit)
    Local unit1 x USB type B female
    1 x RJ45 Ethernet female
    1 x DC Power supply
    Remote Unit2 x USB type A female
    1 x RJ45 Ethernet female
    1 x DC Power supply
    LEDs1 x Power, 1 x Data
    Max Data Rate480 Mbps
    Max Cable Distance50m (165 ft)
    Cable TypeCat 5e/6/6a
    Power Supply5V DC 2A
    Operating Temperature32 to 122 °F (0 to 50 °C)
    Operating Humidity20% - 80% RH
    DimensionsEnds: 2.5 x 1.3 x 0.9 inch (65 x 35 x 25 mm)
    Shipping: 9.5 x 8 x 3 inch (24 x 20 x 8 cm)
    WeightShipping: 1 lbs (450g)

    Downloads

    ManualsDated
    U22-160 Manual
    JUNE 24, 2020
    Additional DownloadsDated
    U22-160 Mechanical (DWG)
    JUNE 24, 2020
    U22-160 Mechanical (DXF)
    JUNE 24, 2020
    U22-160 Mechanical (PDF)
    JUNE 24, 2020
    Spec SheetsDated
    U22-160 Spec Sheet
    JUNE 24, 2020

    Copyright 2020 Hall Research