HBX-R

HDMI Video Extender With Ultra-HD AV, IR, RS232 and Ethernet (Receiver)

  • Fully Compliant with HDBaseT standard
  • Supports virtually all HDMI and DVI resolutions including 4K UHD
  • Extends, Video, Audio, RS-232, IR, and Ethernet
  • Supports extension to 100 m (330 ft)
  • Fully isolates grounds between TX and RX sides
  • Compact, Rugged, Reliable, and Economical
  • Share

Description

This product is a Class A HDBaseT compliant Receiver that supports 100meter Cat6 range and is used to extend HDMI, RS-232, IR, and Ethernet (100BaseT) up to 100 meters (328 feet) using a single Cat6 cable.

Since the product uses the HDBaseT standard, video is extended pixel-by-pixel with no compression or latency. The extender supports all PC and HDTV Resolutions including 4K @ 30 Hz 4:4:4 or 4K @ 60 Hz 4:2:0. The IR extension preserves the modulation (carrier) frequency thereby providing compatibility to most standards.

Receiver includes a universal 5v power supply. IR emitter and IR detector cables are included.

Note about Power Supply

When connected to HBX-S, the Receiver needs the power supply connected as shown above. However, certain Senders, such as the HSM-44-BX Matrix Switch provide Power-over-Cable on their HDBaseT outputs eliminating the need for connecting a power supply to the Receiver.


Features

  • Fully Compliant with HDBaseT standard
  • Supports virtually all HDMI and DVI resolutions including 4K UHD
  • Extends, Video, Audio, RS-232, IR, and Ethernet
  • Supports extension to 100 m (330 ft)
  • Fully isolates grounds between TX and RX sides
  • Compact, Rugged, Reliable, and Economical
  • Plug and play, no configuration needed
  • Receiver can be powered via PoC from senders that provide PoC such as HSM-44-BX Matrix Switch with HDBaseT outputs

Block Diagram

Specifications

Video Standards DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including
12 bit color depth, 3D video and 4K support)
Signal Type TMDS
Resolutions DVI signal - VGA (640x480) thru WUXGA (1920x1200)
HDTV signal - 480i through 1080p
Digital Cinema - 4K30 4:4:4 or 4K60 4:2:0 (4096x2160) up to 60 m
Audio Formats All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD
Master Audio (32-192 kHz sample rate)
DDC Pass-Thru DDC for reading EDID directly from remotely connected LCD and HDCP
handshake
CEC Pass-Thru CEC for Consumer Electronics Control compatible devices
RS232 Bidirectional (full-duplex) any baud rate up to 115,200
Ethernet 100BaseT Ethernet LAN
IR Extended in both directions. Carrier modulation range from 30 kHz to 60 kHz
Power Supply 100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 2 A, regulated
Power Sender & Receiver: 10 watts maximum
Temp/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, non-condensing
Cooling Convection
Mounting End plates with hole for surface mounting
Enclosure type Metal (Aluminum ends, Aluminum Extrusion)
Dimensions 1.0" H x 3.9" W x 3.9" D (25mm H x 100mm W x 100mm D)
Depth excludes connectors
Product weight Sender 9.3 oz (0.58 lb or 264 g)
Receiver 10 oz (0.63 lb or 284 g)
Kit (shipping) 37 oz (2.3 lb or 1050 g) includes: sender, receiver, universal power supply, manual, and packaging
Safety CE
EMI/EMC CE, FCC Class A
MTBF 90,000 hours (Calculated Estimate)
Warranty 3 years parts and labor

Downloads

Manuals Versions Last Updated
HBX-S/HBX-R Manual
JUNE 24, 2020

Copyright 2020 Hall Research