210-LU

2-Port RGBHV Splitter with Universal Sync Input

  • Rugged, Reliable, Economical
  • Automatically detects and accepts all input sync modes
  • 300 MHz Bandwidth
  • Powered from AC adapter or 5 VDC
  • Each output can independently generate composite sync
  • LED power indicator
    • Share

    Description

    The Model 210-LU buffers and splits component (RGBHV, RGBS, or RGsB) video signals for display on two monitors. The unit can drive video cables up to 150 feet or longer depending on the resolution used and cable quality.

    The input video signal can be RGBHV (five connections, separate syncs), or RGBS (four connections, composite sync), or RGsB (sometimes referred to RGB - three connections, with sync-on-green).
    The device is capable of outputting separate, composite, or sync-on-green based on a switch setting independently for each output. For example you can set output # 1 for separate sync and output 2 for sync-on-green regardless of the type of sync at the input. The Model 210-LU can be powered from a supplied power adapter, or from customer supplied +5V DC.

    Features

    • Rugged, Reliable, Economical
    • Automatically detects and accepts all input sync modes
    • 300 MHz Bandwidth
    • Powered from AC adapter or 5 VDC
    • Each output can independently generate composite sync
    • LED power indicator
    • BNC connectors on input and outputs
    • Mounting holes for attachment in user equipment

    Specifications

    Analog inputs3 BNC type labeled RED, GREEN, BLUE

    Input impedance: 75 ohm, voltage level: 3 vp-p max, 1 vp-p nominal
    Sync inputs2 BNC type labeled HOR, VERT
    Input impedance: 2 k ohm, voltage level: 0 - 5 v max, TTL
    Analog Outputs2 independent channels, 3 BNC's each
    Output impedance: 75 ohm, short circuit protected, level: 1 vp-p nominal with termination
    Sync Outputs2 TTL line driver BNC outputs per channel
    level: TTL compatible
    Video AmplifierGreater than 300 Megahertz bandwidth, DC coupled
    Composite SyncTTL on the HOR output, or sync-on-green depending on switch position
    Comp sync polarityNegative
    Input Power6vDC grounded adapter for units with dual power input capability, or +5v DC grounded regulated power supply on Molex connector
    Physical Consumption1.2 watts maximum
    Physical8.88 x 3.13 x 1.35 inch (excluding connectors & mounting bracket) - weight: 1.2 lb

    Downloads

    ManualsDated
    210-LU Manual
    JUNE 24, 2020

    Copyright 2020 Hall Research