Video and Phantom Power over UTP Extender

The Model UV4-S is a 4-channel video splitter that can send a VGA or component video signal to multiple displays on CATx cable. This unit features a standard HD15 VGA connector for the input and has 4 RJ45 connectors for the outputs. It also provide an additional HD15 VGA connector for a local monitor.

The UV4-S can drive UTP cables of lengths up to 500 feet.  At the remote (receiving) end of the cable, a model # UV1-R is required to convert the UTP cable signal back to video for connection to a monitor.

In most setups only one power supply is necessary for the entire system.

The UV4-S Sender/Splitter comes with a power supply that is capable of powering itself and all the UV1-R receivers.

For Cat5 runs of over 300 feet, the receivers may need their own additional supplies that must be ordered separately (HRT model # 511-PS9016A).

Made in the USA.

• Support for local monitor at transmitter
• Multiple Cat-5 outputs
• Transmit video and phantom power on a single CATx cable
• Eliminates the need for bulky, expensive and hard to build multi-coaxial cables for high-resolution video extension
• Amplifies the signal for clean and crisp transmission
• Differential signaling eliminates ground loops and noise
• Handles resolutions up to 1920x1440 at 60Hz
• Rugged, Reliable, Compact size
• Single power supply fpr transmitter and all UV1-R receivers (under 300 ft)
• Drive standard CATx cables to 500 feet for VGA and Component Video

• Video Gain:
  Unity
• Standards:
  VGA, SVGA, XGA, or UXGA video
• Video Types:
  VGA through UXGA, RGBS, RGsB (sync on green), or YpbPr
• Resolution:
  Up to 1920x1200 and 1080p at 500 ft
• Video # and Type:
  1 analog signal input. Standard VGA output RGBHV, RGBS, RGsB, RsGsBs, component video (bi-/tri-level sync)
• Connectors:
  4 or 8 female RJ-45 output
  1 HD15 video input
  1 HD15 local video output
  
• Nominal Amplitude:
  1 V p-p for Y of component video
  0.7 V p-p for RGB and for Pr and Pb of component video
  4.0 V to 5.0 V p-p, for TTL Sync signals of RGBHV, RGBS
  
• Impedance:
  75 Ohms
• Max Distance:
  Up to 500 ft. (150 m) for VGA and Component Video
• Sync Polarity:
  Positive or Negative
• Power Supply:
  100 VAC to 240 VAC, 50-60 Hz, external; 9 VDC regulated, Center Positive
• Recommended Cable:
  Hall Research. Zero-Skew™
• Temp/Humidity:
  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing
  Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, non-condensing
• Enclosure:
  Steel
• Dimensions:
  1.66" H x 8.42" W x 2.60" D
  (42.2mm H x 214mm W x 66mm D)
  Depth excludes connectors
• Shipping Weight:
  3.0 lbs (1.36 kg)
• Vibration:
  ISTA 1A in carton (International Safe Transit Association)
• Safety:
  CE
• EMI/EMC:
  CE, FCC Class A
• MTBF:
  90,000 hours (Calculated Estimate)