Video over UTP sender and local port

UV1-SL

Larger Image

  
  • Local VGA port available for local display
  • Eliminates the need for bulky, expensive and hard to build multi-coaxial cables for High-Resolution A/V extension
  • Amplifies the signal for clean and crisp transmission
  • Differential signaling eliminates ground loops and noise
  • Handles resolutions up to 1920x1440 at 60Hz
  • Rugged, Reliable, Compact size
The UV1-SL converts a VGA signal into a Cat5 and sends this Cat5 signal to one of the following devices: (UV1-R and UV1-R-WP). The UV1-SL also has a loop-thru VGA port for a local monitor. The UV1-SL is supplied phantom power via the Cat5 from the receiving unit or from a local power supply. The UV1-SL can be located up to 500 feet (150 meters) from the sending unit with little to no degradation of video quality.
  • Local VGA port available for local display
  • Eliminates the need for bulky, expensive and hard to build multi-coaxial cables for High-Resolution A/V extension
  • Amplifies the signal for clean and crisp transmission
  • Differential signaling eliminates ground loops and noise
  • Handles resolutions up to 1920x1440 at 60Hz
  • Rugged, Reliable, Compact size
  • Drive standard CAT5 cables to 500 feet for (VGA and Component Video) or to 2000 feet for (Composite Video + Audio)
  • Dimensions:
    UV1-Sender & UV1-Receiver MiniCat®
    0.8" H x 1.7" W x 4.5" D
  • Weight:
    2 lbs. (shipping)
  • Power Supply:
    From utility-power (mains) outlet, through included external power adapter. Output Voltage: 6v to 9v DC Center-Positive. Current requirement 500 ma max
  • Max Distance:
    Up to 500 ft. (150 m) for VGA and Component Video models, or 2000 ft (609 m) for Composite Video and Audio models
  • Resolution:
    Up to 1920x1440 non-interlaced at 60Hz
  • Standards:
    VGA, SVGA, XGA, or UXGA video
  • Video types:
    VGA through UXGA, RGBS, RGsB (sync on green), or YpbPr
Brochures
Manuals
Additional Downloads