HDMI+RS232+IR+PoH UTP ( Dual Gang Wall Plate Sender)

UHBX-SC-WP

Larger Image

  
  • Extends HDMI or DVI video to 500 ft on just one Cat6
  • RS232 and IR extension in both directions with optional add-on
  • Supports all HDMI or DVI resolutions including 4K (UHD)
  • Wall plate does not need power connection (powered via UTP)
  • Power-over-HDBaseT (PoH) meets IEEE 802.3af standard
  • Sturdy and compact metal construction

The UHBX-SC-WP is an HDMI on Cat6 (HDBaseT™) double gang wall plate Transmitter. The package includes the following:

  • UHBX-S-WP Decora® metal insert
  • UHCOM-WP Decora® metal insert
  • Standard white plastic Decora® face-plate
  • Mud-ring for dry wall installation

The UHBX-SC-WP sender module is comprised of the UHBX-S-WP HDMI wall plate transmitter joined to the UHCOM-WP RS232 +IR add-on wall plate. When paired with a compatible receiver ( Hall Research model UHBX-R-PSE ), it can extend HDMI, bi-directional IR, full-duplex RS232, and PoH (power over HDBaseT™) over distances of up to 150 meters (500 feet) using a single Cat6 cable.

UHBX-SC-WP is fully compatible with the following HDBaseT™ receiver from Hall Research:


For best results we recommend using Alliance approved cables listed at this site.
For more information about our other HDBaseT™ extenders please follow the link below to the Product Selection Chart.

  • Extends HDMI or DVI video to 500 ft on just one Cat6
  • RS232 and IR extension in both directions with optional add-on
  • Supports all HDMI or DVI resolutions including 4K (UHD)
  • Wall plate does not need power connection (powered via UTP)
  • Power-over-HDBaseT (PoH) meets IEEE 802.3af standard
  • Sturdy and compact metal construction
  • Fully compatible with HDBaseT™ standard
  • Includes Mud-Ring for easy installation (no electrical box needed)
  • RS232 supports baud rates to 115K
  • IR extension meets all standards regardless of format or frequency
  • Fully isolates ground between TX and RX sides
  • Made in USA
  • Max Distance:
    Standard Mode (STD): 330 ft (100m)
    Long Reach Mode (LR) : 500 ft (150m)
  • Video Standards:
    DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including 12 bit color depth, 3D video and 4K support)
  • Signal Type:
    TMDS
  • Connectors:
    Locking HDMI input, RJ45 HDBaseT output
  • Video Resolutions:
    DVI signal VGA (640x480) thru WUXGA (1920x1200)
    HDTV signal 480i through 1080p
    Digital Cinema 4K (4096x2160)
  • Audio Formats:
    All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio (32-192kHz sample rate)
  • DDC:
    Pass-Thru DDC for reading EDID directly from remotely connected LCD and HDCP handshake
  • CEC:
    Pass-Thru CEC for Consumer Electronics Control compatible devices
  • RS232:
    Bidirectional (full-duplex) any baud rate up to 115,200
  • IR:
    Extended in both directions. Carrier modulation range from 30 KHz to 60 KHz
  • PoH:
    Power-over-HDBaseT meets IEEE 802.3af standard.
    PD side identifies as Class 2 PoE device (3.84–6.49 watts).
    Actual power consumption of PD side is 5.5 watts max
  • Power Supply:
    100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 3.2 A, regulated
    Actual DC current (powering both –PSE and –PD sides) 1.8A max
  • Power:
    3.0 watts (10 BTU) maximum
  • Temp/humidity:
    Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing
    Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, non-condensing
  • Cooling:
    Convection
  • Mounting:
    Metal
  • Enclosure:
    Metal (Steel ends and Aluminum extrusion)
  • Dimensions:
    1.18" H x 4.13" W x 4.57" D (30mm H x 105mm W x 116mm D) Depth excludes connectors
  • Product weight:
    Sender: 9.3 oz (0.58 lb or 264 g)
  • Vibration:
    ISTA 1A in carton (International Safe Transit Association)
  • Compliance:
    CE, FCC Class A
  • MTBF:
    90,000 hours (Calculated Estimate)
  • Warranty:
    2 years parts and labor