The UHBX-4X is a 1 RU box that converts 4 HDMI inputs to corresponding HDBaseT™ outputs for extension to 150 meters (500 ft) on single UTP. The extender supports HDCP, 3D, Deep Color, CEC, and 4 K (UHD) resolutions. Compatible receivers include the low-cost self-powered UH-1BT-R and UH-1BTX-R for HDMI extension to 230 ft or 330 ft respectively, or the UHBX-R-PD that supports RS-232, IR, PoH (Power over HDBaseT), and Long Reach modes to 500 ft. When using receivers with PoH function, a single optional 48v power supply is needed for the 4-channel sender (power supply part number: 511-PS4815).
The UHBX-4X provides both IP (Ethernet), and RS-232 ports for control. Using these ports the user can address and send RS-232 or IR commands to any of the receivers to control the remote display. IR signals can also be extended in both directions. Besides being able to create IR commands by itself (via RS-232 or IP control ports), the UHBX-4X provides a jack for an IR detector cable. The IR received by the detector can be routed to any one or combination of outputs. 4 separate IR emitter ports are also provided on the rear of the UHBX-4X which can be used if a user connects IR detectors at each remote location. This would be perfect for controlling multiple sources in a rack with the UHBX-4X.
The UHBX-4X chassis is identical to UHBX-8X and it can be factory upgraded to 8 channels if required.
For best results we recommend using Alliance approved cables listed at this site.