All-In-One Console Extender

U97-Ultra-2B

Larger Image
  • Combines the functions of Hall Research Models U97-H2, UU2X4-P1, two SKU-RGB, DVC-3 video test pattern generator, and more
  • Eliminates the need for Utility Box (Receiver includes a guard plate that goes over all the connectors with tie-down provisions for strain relief)
  • Does not require external power supply (built-in supply with standard 110~240 VAC IEC320 jack)
  • Includes 2 “Direct” USB ports (DR1 & DR2), and a Standard with Hub at receiver.
  • DB15 connector for Amplified audio input and loop output at the sender as well as DB15 output at the receiver to directly drive passive speakers
  • Built-in video Skew Correction on both video channels. This corrects the lack of RGB convergence when long Cat6 cables are used. Eliminates the need to use special low-skew UTP cables for long runs
The Hall Research Model U97-Ultra-2B kit is used to extend Dual Display PC Video, Stereo Audio (amplified or line level), RS-232, and up to 3 independent USB ports to a remote location up to 500 feet away on any Category Cable (CAT5e/6 etc).

These products include a rack-mountable Sender Unit plus a wall-mountable Receiver (and I/O hood cover), packaged together. However they can also be sold separately under the U97-Ultra-2B-R and U97-Ultra-2B-S Part #'s.
  • Combines the functions of Hall Research Models U97-H2, UU2X4-P1, two SKU-RGB, DVC-3 video test pattern generator, and more
  • Eliminates the need for Utility Box (Receiver includes a guard plate that goes over all the connectors with tie-down provisions for strain relief)
  • Does not require external power supply (built-in supply with standard 110~240 VAC IEC320 jack)
  • Includes 2 “Direct” USB ports (DR1 & DR2), and a Standard with Hub at receiver.
  • DB15 connector for Amplified audio input and loop output at the sender as well as DB15 output at the receiver to directly drive passive speakers
  • Built-in video Skew Correction on both video channels. This corrects the lack of RGB convergence when long Cat6 cables are used. Eliminates the need to use special low-skew UTP cables for long runs
  • Built-in Test pattern generator for long cable compensation (High Frequency Gain) and Skew correction.
  • Supports DDC channel with EDID (Extended display ID)
  • Video Inputs:
    PC outputs (VGA to WQHD)
  • Resolutions:
    PC resolutions up to 2560x1440 @ 60 Hz
  • Video Levels:
    0 to 0.7v p-p
  • Dimensions:
    Sender (H x W x D) - 1.5 x 19 x 5.06 inch
    Receiver (H x W x D) - 1.75 x 14 x 4.06 inch
    Receiver Cable Cover (H x W x D) - 1.75 x 13 x 4 inch
  • Weight:
    Sender - 4 Lbs
    Receiver - 3 Lbs
  • USB Support:
    High Speed devices (12Mb/s)
    Low Speed devices (1.5Mb/s)
    High Speed devices on DR1 and DR2 only (480Mb/s)
  • UTP Cable:
    Up to 330 feet using any Cat5e or 500 ft using Cat6
  • Temperature:
    Operating: 32 to 122 DegF (0 to 50 DegC);
    Storage: -40 to +185 DegF (-40 to +85 DegC)
  • Enclosure:
    Steel
  • MTBF:
    90,000 hours (calculated estimate)
  • Power:
    100VAC to 240VAC 50/60Hz