Microphone and Line-Level Audio Extender Receiver

HR-101-R

Larger Image

  
  • MIC preamp input
  • Stereo line level audio input
  • Local analog stereo line level and digital SPDIF audio outputs
  • Adjustable gain for MIC preamp input
  • VU meter to indicate MIC preamp gain
  • Phantom power to accommodate a wide range of MIC inputs
The Model HR-101-R Receiver has an ST fiber optic input connector to receive audio from the sender. It provides a stereo line level output on 3.5mm mini-stereo jack and a SPDIF digital audio output on a RCA connector.

The HR-101 a professional quality Fiber-Optic audio extender kit. comprised of two units: a sender (HR-101-S) and a receiver (HR-101-R). The HR-101 can extend an audio over a single multi-mode fiber optic cable spanning distances of over 1000m (3280ft). For lengths of upto 500 meters OM2 or OM3 cables are recommended, and for distances of over 500 meters OM3 cable is recommended.

The HR-101-S is a compact and professional grade microphone amplifier with stereo line-level mix that can be used as a stand-alone device, or paired with the HR-101-R to extend audio over long distances on fiber optic cables.
  • MIC preamp input
  • Stereo line level audio input
  • Local analog stereo line level and digital SPDIF audio outputs
  • Adjustable gain for MIC preamp input
  • VU meter to indicate MIC preamp gain
  • Phantom power to accommodate a wide range of MIC inputs
  • Safety interlock does not turn on high-power fiber LED drivers unless fiber-optic cable is plugged in at both ends
  • Green design, turns off parts of circuit when they are not in use
  • Compact, Rugged, Reliable, and Economical
  • Made in USA
  • Audio Inputs:
    1x 3.5mm analog line level stereo,
    1x XLR microphone
  • Audio Outputs:
    1x 3.5mm stereo analog , 1x RCA SPDIF Digital
  • Mic In Impedance:
    6.8 KΩ
  • Mic Phantom Power:
    15vDC (note that most mics rated for 48v accept
    range of 12~48 vDC, with some 9~52 vDC)
  • Mic Amplifier Noise:
    1.3nV/√Hz RFI at 1KHz
  • Mic CMR:
    100 dB min
  • Audio Bandwidth:
    3 Hz to 30 KHz
  • Optical Wavelength:
    840 nm GaAIAs LED
  • Optical Cable:
    Simplex (only 1 fiber) Multi-Mode. OM2 or OM3
  • Enclosure:
    Aluminum and Steel
  • Temperature:
    Operating: 32 to 122°F (0 to 50°C);
    Storage: –40 to +185°F (–40 to +85°C)
  • MTBF:
    90,000 hours (calculated estimate)
  • Power:
    5V DC, 2.6A (actual consumption less than 0.25A)
  • Size:
    1.64’’H x 4.18’’W x 5.08’’D
    (4.2x10.6x12.9 cm)
  • Weight:
    0.34 pounds (0.153 kg)